How to Time Your Workouts: Stopwatch, Intervals, Rest Between Sets and Simple Plans
By Vclock · · 7 min read
Most people think of weights, miles and reps when they plan a workout, and forget the number that quietly decides how hard a session feels: time. How long you rest between sets, how long you work in an interval, how long you hold a plank and how fast you run a lap all shape what the workout does to your body. A simple timer or stopwatch turns a vague workout into a clear, repeatable one.
This guide explains how to use time in training. It covers rest between sets, the popular interval formats called Tabata, EMOM and AMRAP, how to use a stopwatch for running and swimming, warm-ups and cool-downs, and some simple timed workouts to try. It is general information and not medical advice, so check with a doctor before starting a new exercise programme, and stop if you feel dizzy, faint or in pain.
Why timing your workout helps
A timer gives you three things. It makes the workout consistent, because rest and work are the same each time, so you can see real progress. It keeps you honest, because five minutes of rest tends to become ten when you are looking at your phone. And it removes thinking, so you can concentrate on form and effort instead of watching the clock.
For most people, the easiest way to start is to time one thing. Choose either your rest periods or your work intervals, and keep them the same for a few weeks.
How long should you rest between sets?
Rest length depends on your goal. These are common ranges used by coaches and in training guidelines, and individual needs vary.
- Heavy strength work, with low reps and heavy weight: about 2 to 5 minutes, so your muscles and nervous system can recover for the next hard set.
- Building muscle size, with moderate weight and 8 to 12 reps: about 1 to 3 minutes, shorter for small exercises and longer for big lifts such as squats.
- Muscular endurance, with light weight and many reps: about 30 to 60 seconds, or less.
- Bodyweight circuits: often 15 to 30 seconds between exercises and 1 to 2 minutes between rounds.
Start your timer as soon as you put the weight down, not when you start thinking about the next set. If you need more rest, take it, and write down the time you needed, so you can see yourself improve. Our 1 minute timer and 2 minute timer are handy for rests.
Interval training: work, rest, repeat
Interval training alternates harder efforts with easier recovery. It lets you work harder than you could in one continuous effort, and it is popular because it fits a lot of training into a short time. All the formats below are just different ways of setting the clock.
- Tabata: 20 seconds of very hard effort followed by 10 seconds of rest, repeated 8 times, for a total of 4 minutes. It is named after the Japanese researcher Izumi Tabata, who published a well known study of this pattern in 1996. It is very demanding, so most people do one or two rounds.
- EMOM, short for every minute on the minute: at the start of each minute, you do a set number of reps, and rest for whatever remains of that minute. Do 10 squats every minute for 10 minutes, for example. If the reps take 40 seconds, you rest for 20.
- AMRAP, as many rounds as possible: you set a time, such as 12 minutes, and do as many rounds of a short list of exercises as you can before the clock stops.
- Simple 30 and 30: 30 seconds of work and 30 seconds of rest. It is a gentle introduction to intervals, and a [30 second timer](/set-timer-for-30-seconds/) is all you need.
- Running intervals: for example 1 minute of fast running and 2 minutes of easy jogging, repeated 6 to 10 times.
If you do intervals, build up gradually. Start with a longer rest than work, for example 20 seconds of work and 40 seconds of rest, and shorten the rest over weeks as you get fitter.
Using a stopwatch for running, cycling and swimming
A stopwatch with laps is the classic training tool. On a track or in a pool, press Lap at the end of each length or circuit, and you get your split times. The aim of a good run is often an even pace. Runners talk about a negative split, which means running the second half faster than the first, and many people find it a good way to pace a race.
Our online stopwatch shows hundredths of a second, records laps with the split and the total, marks your fastest and slowest lap once you have three, and lets you copy the results to a note. On a computer you can use Space to start and stop, L for a lap and R to reset. For a swim or a track session, you may want to start the stopwatch before you begin and keep it running, pressing Lap at every length.
Holds and stretches
Static exercises are all about time. A plank is often held for 20 to 60 seconds, depending on your level, and it is better to stop with good form than to stay longer with a sagging back. Many stretches and yoga poses are held for 20 to 60 seconds, and a timer lets you relax into them without counting. If you want to do both sides, set the timer for the full length each time.
Warm-ups and cool-downs
A warm-up of 5 to 10 minutes, with gentle movement that raises your heart rate and loosens your joints, prepares your body for harder work. A cool-down of around 5 minutes, with easy movement and some stretching, helps your breathing and heart rate settle. Time them as part of the session, because they are the first things people skip when they are in a hurry. A 5 minute timer works for both.
Three simple timed workouts
Here are three ready-to-use examples. Adjust them to suit your fitness, and keep the effort sensible.
- A beginner circuit (about 20 minutes): warm up for 5 minutes. Then do 4 exercises, for example squats, push-ups, a plank and marching on the spot, for 30 seconds each with 30 seconds of rest between them. Rest for 1 minute after each round and do 3 rounds. Cool down for 3 minutes.
- A strength session (about 40 minutes): warm up for 5 minutes. Do 4 main lifts, each for 3 sets of 8 reps, resting 2 minutes between sets. Finish with a 5 minute cool-down.
- A run-walk session (30 minutes): after a 5 minute walk, alternate 1 minute of easy running with 2 minutes of walking, for about 8 rounds, then walk for 5 minutes. Over the weeks, lengthen the running and shorten the walking.
Tips for timing your workouts
- Choose a timer you can see and hear from where you are exercising, and set the sound to loud.
- Prepare the timer before you start, so you are not fiddling with a screen when your hands are sweaty.
- Keep the screen awake with the Keep screen on button, so it does not go dark in the middle of a set.
- Write down your rests and times, and try to improve one thing at a time.
- Do not rush your rests just to finish sooner. The point is to be ready for the next set.
Common mistakes
- Starting too hard with 20 and 10 intervals, which are very tough.
- Not timing rests, so that rest drifts from one minute to five.
- Chasing speed instead of form on timed sets.
- Skipping the warm-up and cool-down to save time.
- Training through pain or dizziness. Stop and rest.
- Changing many things at once, so you cannot tell what is working.
The bottom line
Time is the simplest thing you can add to a workout, and it makes everything else clearer. Time your rests, choose an interval pattern that matches your level, use the stopwatch for splits and make the warm-up and the cool-down part of the plan. A free online timer and a stopwatch are all the equipment you need.
Frequently asked questions
How long should I rest between sets?+
For heavy strength work, about 2 to 5 minutes. For building muscle, about 1 to 3 minutes. For endurance work with light weights, 30 to 60 seconds or less. These are common ranges, and individual needs vary.
What is a Tabata workout?+
Tabata is an interval format of 20 seconds of very hard effort followed by 10 seconds of rest, repeated 8 times for a total of 4 minutes. It is named after Izumi Tabata, who published a well known study of the pattern in 1996. It is very demanding, so build up to it.
What does EMOM mean?+
EMOM stands for every minute on the minute. At the start of each minute you do a set number of reps and rest for the rest of that minute. For example, 10 squats every minute for 10 minutes.
What does AMRAP mean?+
AMRAP means as many rounds as possible. You set a time, such as 12 minutes, and complete as many rounds of a short list of exercises as you can before the time runs out.
How can I use a stopwatch for running?+
Start the stopwatch at the beginning, press Lap at the end of each lap or kilometre to record your splits, and check whether your pace is even. Running the second half faster than the first is called a negative split.
How long should a warm-up be?+
Most people do well with 5 to 10 minutes of gentle movement that raises the heart rate and loosens the joints, followed by a cool-down of about 5 minutes after the workout.