Time Zones Explained: How They Work, Why There Are So Many and How to Use Them
By Vclock · · 9 min read
When it is noon in London, it is the middle of the night in Sydney and early morning in New York. Most of us accept this without thinking about it, until we try to arrange a video call between three countries and the whole thing falls apart. Time zones are one of those inventions that are invisible when they work and confusing when you try to understand them.
This guide explains how time zones work from the beginning: why we need them, where the system came from, what UTC and offsets mean, why some zones are half an hour or 45 minutes off, how the date line works and why so many countries pick their own rules. By the end, a map of world time should make sense, and so should the next meeting invite.
Why we need time zones
The Earth turns once every 24 hours, so the sun reaches its highest point at different moments in different places. For most of history that did not matter. Every town kept its own local time, set by the sun, and a clock in one city could be several minutes different from a clock in the next city along the road. Nobody travelled fast enough to notice.
Railways changed that. A train timetable needs one time that everyone agrees on. In Britain, the Great Western Railway began using London time at all its stations in 1840, which became known as railway time. In North America the problem was worse. Before 1883 there were dozens of local times in use, and railways ran on their own mixtures of them. On 18 November 1883, the American and Canadian railways switched together to a system of standard time zones, a day sometimes called the day of two noons because many clocks had to be set back or forward.
From railway time to a world clock
In 1884 delegates from 25 countries met in Washington for the International Meridian Conference and chose the line that runs through the Royal Observatory at Greenwich, in London, as the prime meridian, the zero line of longitude. The idea behind time zones followed from the geometry. The Earth turns through 360 degrees in 24 hours, which is 15 degrees every hour, so the world could be divided into 24 zones, each one hour apart.
That did not make every country adopt the system at once. Each government decided for itself, and many countries took decades. The United States, for example, only put standard time into federal law in 1918. Even now, the map of time zones is a political map as much as a geographic one.
GMT and UTC: what is the difference?
You will see two names for the reference time: GMT and UTC. Greenwich Mean Time was originally the average time of the sun at Greenwich. Coordinated Universal Time, UTC, is the modern standard. It is kept by atomic clocks and adjusted now and then by a leap second to stay close to the Earth's rotation. For everyday purposes, the two are the same, and the United Kingdom uses GMT in winter. Scientists, pilots, computer systems and international organisations use UTC.
Today every time zone is written as an offset from UTC. If a place is two hours ahead of UTC, it is UTC+2. If it is five hours behind, it is UTC-5. Places to the east are ahead, because the sun reaches them first, and places to the west are behind.
How offsets work
Here are some familiar examples, shown in winter and summer where the clocks change:
- Los Angeles: UTC-8 in winter, UTC-7 in summer
- New York: UTC-5 in winter, UTC-4 in summer
- London: UTC+0 in winter, UTC+1 in summer
- Paris and Berlin: UTC+1 in winter, UTC+2 in summer
- Dubai: UTC+4 all year
- Kolkata and the rest of India: UTC+5:30 all year
- Tokyo: UTC+9 all year
- Sydney: UTC+10 in winter, UTC+11 in summer
To convert between two places, subtract the offsets. New York in summer (UTC-4) and London in summer (UTC+1) are five hours apart, so 9:00 AM in New York is 2:00 PM in London. The only trick is to use the offset for that date, because the offset changes when clocks go forward or back. Our guide to how to convert time zones walks through it step by step, and the time zone converter does it for you.
Why there are more than 24 zones
If time zones followed geometry exactly, there would be 24 of them. In reality there are about 38 different offsets in use, from UTC-12 to UTC+14, because each country chooses the time that suits it. The result is some interesting oddities.
- Half-hour zones: India and Sri Lanka use UTC+5:30, Iran uses UTC+3:30 and Afghanistan UTC+4:30. In Australia, Adelaide and the Northern Territory use UTC+9:30, and Newfoundland in Canada uses UTC-3:30.
- A 45 minute zone: Nepal uses UTC+5:45, and the Chatham Islands of New Zealand use UTC+12:45.
- One zone for a whole country: China spans an area that would normally cover five time zones, but the whole country uses Beijing time, UTC+8, a choice made in 1949. Some people in the far west of China use an unofficial local time in everyday life.
- Many zones for one country: Russia uses 11 time zones. France has the most of any country, around a dozen, when its overseas territories are included.
- A country on the wrong clock: Spain lies in the same longitude as the United Kingdom, but it uses Central European Time, an hour ahead of what the sun suggests. It has done so since 1940.
- The edges of the map: the largest offset is UTC+14, used by Kiritimati in Kiribati, and the smallest is UTC-12, used by uninhabited Baker Island. That means the date on Earth can differ by up to 26 hours.
India is a good example of a political choice. The country stretches across about 30 degrees of longitude, which would suggest two zones, but it settled on one standard time based on the 82.5 degree east meridian. A single time is simpler for railways, broadcasting and government, even if the sun rises much earlier in the east.
The International Date Line
The date has to change somewhere, and that place is the International Date Line, which runs roughly along the 180 degree meridian in the Pacific Ocean. It is not a straight line. It bends around islands and countries so that neighbouring places can keep the same calendar date. If you travel east across the line, you subtract a day, and if you travel west, you add one.
Countries sometimes move the line by changing their mind. In 2011 Samoa decided to move from the east side of the line to the west, to be closer in time to its main trading partners, Australia and New Zealand. To do it, Samoa skipped a whole day: the calendar went from Thursday 29 December straight to Saturday 31 December, and nobody there had a 30 December that year.
Daylight saving time makes it harder
On top of time zones, many countries move their clocks by an hour in the summer. This makes the offsets change during the year, and it does not happen on the same dates everywhere. The United States and Canada change in March and November, the United Kingdom and the European Union change at the end of March and the end of October, and countries in the southern hemisphere change in the opposite direction. For a few weeks each year the gap between New York and London is four hours instead of five. We explain all the dates in our guide to daylight saving time, and you can see a live countdown on the daylight saving time page.
The confusion of abbreviations
Time zone abbreviations look helpful, but they cause as many mistakes as they solve. IST can mean India Standard Time, Irish Standard Time or Israel Standard Time. CST can mean Central Standard Time in North America, China Standard Time or Cuba Standard Time. EST is often used by people who really mean Eastern Time, which is EDT in summer. When you write an invite, name the city or give the UTC offset, so that nobody has to guess.
How computers keep track of zones
Software needs a reliable list of all these rules. Most computers, phones and websites use the IANA time zone database, also called the tz database or Olson database after its first maintainer. It gives each zone a name made of a region and a city, such as America/New_York or Asia/Kolkata, and it records every change in each place's rules over time. There are more than 400 named zones in it, because many places that share an offset today had different rules in the past.
Developers also learn an important rule: store times in UTC and convert them to local time only when you show them to a person. A Unix timestamp is a simple example of that idea, because it counts seconds from a fixed moment in UTC and has no zone at all.
How to work across time zones
- Share times in UTC or with the city name, for example 14:00 UTC or 9:00 AM New York time.
- Use 24 hour time for international teams, so there is no mix-up between AM and PM.
- Check the dates when clocks change, especially for recurring meetings.
- Use a converter or the [world clock](/world-clock/) to compare places, and a meeting planner to find hours when everyone is at work.
- When one side of the world is asleep, send a message instead of a call, and rotate the awkward hours fairly.
For the most common pairs, there are ready tables, such as EST to PST and the other pages linked from the time zone converter.
Quick facts
- The Earth turns 15 degrees every hour, which is where the idea of 24 zones comes from.
- About 38 different offsets are in use, from UTC-12 to UTC+14.
- Russia has 11 time zones, and China uses just one.
- France has the most zones of any country when overseas territories count.
- Nepal (UTC+5:45) and the Chatham Islands (UTC+12:45) use 45 minute offsets.
- Samoa skipped 30 December 2011 when it crossed the date line.
The bottom line
Time zones are a mixture of astronomy, engineering and politics. The sun gives the starting point, railways and radio made agreement necessary, and every government has added its own choices. Once you remember the three basics, the rest is simple: everything is an offset from UTC, offsets change with daylight saving time, and a city name is always clearer than an abbreviation.
Frequently asked questions
How many time zones are there?+
In theory there are 24, one for every hour of the Earth rotation. In practice, countries choose their own time, so about 38 different offsets are in use, from UTC-12 to UTC+14. The IANA database lists more than 400 named zones because many places have had different rules in the past.
What is the difference between GMT and UTC?+
GMT was originally the average solar time at Greenwich, London. UTC is the modern standard kept by atomic clocks. For everyday use they are the same time, and UTC is the name used in science, aviation and computing.
Which country has the most time zones?+
France has the most time zones of any country, around a dozen, because its overseas territories are spread across the world. Russia has the most zones on a single continuous landmass, with 11.
Why does India have a half-hour time zone?+
India uses one standard time for the whole country, based on the meridian at 82.5 degrees east. That meridian lies between two whole-hour zones, so the country sits at UTC+5:30. A single time keeps railways, broadcasting and government simple.
Why does China have only one time zone?+
China has used Beijing time, UTC+8, across the whole country since 1949, even though it spans an area that could hold five zones. A single time keeps the country in step for government and transport, though some people in the far west use an unofficial local time.
How do I find the time in another country?+
Use the world clock for the current time in any country, or the time zone converter to turn a date and time in one place into the time in others. Both use the correct offset for the date, including daylight saving time.